How To Change Ip Windows 10

On Windows 10, y'all can configure a network adapter to use a static IP address manually, or y'all tin use an automatically assigned configuration using the local Dynamic Host Configuration Protocol (DHCP) server.

Although using a static IP address is recommended for devices that provide services to network users, as its configuration never changes, it may come up the time when you may no longer need this configuration, and a dynamically assigned network configuration will be more than suited.

If you utilise a static IP address and need to switch to a dynamic configuration, it's possible to perform this task in several ways, including using the Settings app, Control Panel, Command Prompt, and even PowerShell.

In this guide, y'all'll learn the steps to remove a static IP address configuration to obtain a dynamic configuration from the DHCP server on Windows x.

Configure dynamic IP address (DHCP) using Settings
Configure dynamic IP address (DHCP) using Command Prompt
Configure dynamic IP address (DHCP) using PowerShell
Configure dynamic IP accost (DHCP) using Control Panel

Configure dynamic IP address (DHCP) using Settings

To configure a network adapter to asking a DHCP configuration instead of a static IP address, use these steps:

Open Settings.
Click on Network & Internet.
Click on Ethernet or Wi-Fi.

Of import: The ability to edit the IP settings for an Ethernet adapter in the Settings app is available starting with Windows ten version 1903, April 2019 Update, and later.
Click the network connectedness.
Under the "IP settings" section, click the Edit button.
Use the Edit IP settings drop-down bill of fare and select the Automatic (DHCP) option.
Click the Save push button.

Once you complete the steps, the networking stack configuration volition reset, and your device volition request an IP address from the DHCP server (normally your router).

Configure dynamic IP accost (DHCP) using Command Prompt

To switch from a static TCP/IP configuration to a dynamically assigned configuration using DHCP with Control Prompt, use these steps:

Open Offset.
Search for Command Prompt, right-click the top result, and select the Run as administrator selection.
Blazon the following command to annotation the name of the network adapter and press Enter
```
ipconfig
```
Type the following command to configuring the network adapter to obtain its TCP/IP configuration using DHCP and printing Enter:
```
netsh interface ip ready address "Ethernet1" dhcp
```
In the command, make sure to modify "Ethernet1" for the adapter'south name that yous desire to configure.

After completing the steps, the network adapter will terminate using a static IP address, and it'll obtain a configuration automatically from the DHCP server.

Configure dynamic IP accost (DHCP) using PowerShell

To remove a static IP and DNS addresses to use a dynamic configuration using PowerShell, utilize these steps:

Open Kickoff.
Search for PowerShell, right-click the top result, and select the Run as administrator option.
Type the following control to note the "InterfaceIndex" number for the network adapter and press Enter:
```
Get-NetIPConfiguration
```
Type the following command to enable the network adapter to obtain its TCP/IP configuration using DHCP and press Enter:
```
Become-NetAdapter -Name Ethernet1 | Set-NetIPInterface -Dhcp Enabled
```
In the command, brand certain to modify "Ethernet0" for the adapter's name that you want to configure.
Type the post-obit command to enable the network adapter to obtain its DNS configuration using DHCP and press Enter:
```
Ready-DnsClientServerAddress -InterfaceIndex 3 -ResetServerAddresses
```
In the command, change "3" for the InterfaceIndex for the adapter to configure.

Once you complete the steps, the IP and DNS addresses will be reset from the adapter, and your computer will receive a new dynamic configuration from DHCP.

Configure dynamic IP address (DHCP) using Control Panel

To configure a network adapter to use a dynamic IP address using Control Panel, use these steps:

Open Control Panel.
Click on Network and Net.
Click on Network and Sharing Center.
On the left pane, click the Change adapter settings link.
Right-click the network adapter and select theBackdrop option.
Select the Internet Protocol Version 4 (TCP/IPv4) selection.
Click the Properties button.
Select the Obtain an IP address automatically option.
Select the Obtain the post-obit DNS server address automatically option.
Click the OK button.

Later completing the steps, the statically assigned TCP/IP configuration volition no longer be available, and the estimator will automatically request a dynamic network configuration from the network.